Rheology Modified

Service Details:

AVCRETE LC-RM is a high strength repair mortar which is ideal for vertical and overhead repairs. It is basically a general purpose cementitious, hand applied, patch repair mortar with excellent anti-sag properties for overhead applications. It is ideal for repairs to sections upto 50mm.

• Polymer modified
• Excellent volume stability
• High built
• Low permeability
• Compensated shrinkage
• Excellent bonding
• Long term durability

• Can accommodate- depths to 50 mm vertically, 20 mm overhead and 10- 100 mm horizontally

• Reinstatement mortar for general patch repairs to concrete structures

• Utmost care should be taken to remove all loose concrete, laitance, grease, paint and oil through the approved method of grit blasting and needle gun

• Immediately after the completion of troweling, mist spraying with water is required for curing Avcrete- HSRM
• In case of fast drying conditions, covering with hessian cloth may be required for supplementary protection

• Substrate or air temperature should be maintained between 5 C and 35 C for repairing work
• For any application above 35, manufacturer should be consulted for instructions

• Avcrete- HSRM should be immediately removed from tools and equipment by using clean water
• It can be removed by acid etching or by other mechanical means

• Prior to the priming, remove all dust by vacuum or brush
• Thoroughly damp the concrete or masonry surface with water
• Before priming, remove any standing water
• All the components should be mixed and scrub well into substrate as per the instructions
• Avcrete- HSRM is then applied to the primer
• The primer must not be allowed to dry out