Flooring Screed Mortar

Service Details:

Flooring Screed Mortar - Avcrete ESD LMC is widely recognized as the floor resurfacer for heavy duty industries. It is developed specifically for use as conductive flooring. This flooring generally comprises of cement, graded high strength aggregates and performance polymers. In order to get an anti- static floor, this is applied in just 12 to 40 mm of thickness onto new or existing base concrete surface.

Advantages:

• Pre-blended, cementitious conductive flooring screed mortar
• No over coating is required
• Easy to repair
• Long life of floor
• Suitable for Indian weather conditions
• Ideal for both internal and external working conditions
• Quick installation with minimum tools and machines
• Only 48 hours are required for curing, hardening and to accept full traffic
• Needs only water addition
• High impact and wear resistant properties
• Can be laid in proper levels even if the base is uneven
• Tested for Electrical Resistance at CPRI under Ministry of Power for compliance under BS 2050-1978, Clause A.4.1
• Superior alternative to Epoxy/PU or PVC tile system
• High flexural strength
• Suitable for thin section applications

Installation Guide:

• Guides or side forms of height should be used to match the required FFL (finished floor level)
• Cleaned SSD (saturated surface dry) surface is primed with Avcrete bonding additive
• In consultation with Avcon, earthing components are installed
• Pour the mixed Avcrete-ESD-LMC onto the tacky primed surface
• Floating with power trowel to achieve desired finish
• Immediately apply curing compound after the completion of finishing operations
• Do not apply curing compound if epoxy topping is desired
• Wet curing for maximum 2 days

Applications areas:

• Aerospace detonator handling
• Electronics manufacturing & testing facility
• Data centers
• Energetic devices
• Weapons and ammunition
• Blasting agents used in automobile airbag manufacturing
• DOD, Military & Military ordinance areas
• Engineering labs

Yield:

• Supplied in- 25 kgs and 50 kg bags
• For eg- 10 mm thick floor will require 23.50 kgs per m2

Storage:

• It should be stored in unopened bags in clean dry conditions

Health and safety:

• The unmixed powder is of irritant nature as is any cement product, hence, skin contact should be avoided